pbxnsip CS410 Know How

Technical 'Know How'

Some technical questions

CS410 start up - 'Know How' -
Upon initialization you will see the Power and Run lights on solid green and the LAN connection amber if it is plugged in. The run light will change to flashing green once the system is up and running. By default the WAN port is programmed to be IP Address 192.168.1.99. The LAN port will get it's IP Address from your DCHP server which is normally the router.

CS410 Hang Up Detection - 'Know How' -
FXO Analogue detection is different in most countries. We have added some changes to the pbx to detect when an FXO line is not active but still connected. In these cases the PBX will drop the call.

CS410 max extensions- 'Know How' -
The CS410 comes in 2 versions, CS410 and CS425. Each has 10 and 25 extensions. The processing power of the appliance will not cope with any more extensions than 25. It does not support G729 calls to the gateway or call recording. Such processing is far too high for our cool 5 watt appliance.

CS410 - cool as a cucumber - 'Know How'
A cucumber is green and so too is the CS410 and CS425. With only 5 watts of electricity it saves power costs.

CS410 - Use it without FXO - 'Know How'
With the cost of the CS410 and CS425 is so low you don't have to use the FXO ports. With an all in one appliance at 5 watts of electricity, you will save on hardware and power consumption from day 1.